WOOD WORK DIY

Posted on Tuesday, July 6th, 2010 at 2:34 pm




WOOD WORK DIY
what is the best system for HVAC for 100yrs old wood frame 2 story 2 family house?

a house with about 1500sf at ground floor, 1200sf upper floor.
two units(5rooms 2 bedroom and 8rooms 5 bedroom) side by side.
currently has steam heating with oil boiler.
should it be a DIY project or a work by a licensed plumber?
any suggestion will be welcomed.

I would check with a HVAC contractor. There are so many different types available now, he would have more knowledge of them and how they operate.
Personally, I like the ones that have a boiler and the hot water goes to a manifold which has solenoids for each room and is controlled by a thermostat in each room. That way, people can control their own temp in the bedrooms. I believe they use baseboard registers throughout the house. Good luck

How To Build a Solid Timber Floor


Mighty Putty MP-1001 Fix, Fill & Seal Epoxy Bond. Supports up to 350 Pounds. Set of Six.


Mighty Putty MP-1001 Fix, Fill & Seal Epoxy Bond. Supports up to 350 Pounds. Set of Six.


$9.90


Mighty Putty MP1001 Fix, Fill & Seal Expoxy Bond. Supports up to 350 Pounds. Set of Six….

Wine Rack Lattice


Wine Rack Lattice


$51.17


Panels are produced from sturdy moldings -3/4″ thick x 7/16″ wide with radius edges. Glued and mechanically fastened at joints. Bottle openings are 4″ X 4″. Easily cut to desired size….

Dewalt DPG82-11C Concealer Clear Anti-Fog Dual Mold Safety Goggle


Dewalt DPG82-11C Concealer Clear Anti-Fog Dual Mold Safety Goggle


$8.53



RAD Cycle Products Ceiling Mount Bike Hoist


RAD Cycle Products Ceiling Mount Bike Hoist


$12.94


There’s no such thing as not enough room for another bike. Store your bikes overhead and out of the way. Smooth pulleys and latches make lifting even heavy bikes super easy. The exclusive rope locking mechanism prevents unwanted release and can suspend one bike – 55 lb. load limit. Please note, you can mount this item as pictured on a 2 x 4 and screw the 2 X 4 to the joist or mount it right to the…

Dremel 290-01 0.2 Amp 7,200 Stroke Per Minute Engraver includes Letter and Number Template


Dremel 290-01 0.2 Amp 7,200 Stroke Per Minute Engraver includes Letter and Number Template


$17.00


Engrave, decorate, or personalize a wide variety of materials–from metal to plastic to wood and leather–with the Dremel 290-01 7,200 Stroke Per Minute Engraver. This handy tool includes a letter and number template for infinite artistic possibilities. It also features a soft-grip body, replaceable carbide engraving point, and variable stroke control..caption {font-family: Verdana, Helvetica neue…

Wood Works 705


Wood Works 705




Wood Works 701


Wood Works 701




You can leave a response, or trackback from your own site.

Leave a Reply